The RNF Retro is our latest spin on the always evolving #RoundNoseFish. It features noticeable elements from the purist (mostly San Diego influenced) evolution of wide, split tailed “Fish”, and smashes them together with much of what we have learned in nearly 25 years of shaping and riding the RNF. 5'11" x 21.75" x 2.56" Vol:39L
First off, the tail is wide for that effortless glide and retro vibe. Coming in at over 10” from tip to tip, and 4” deep, it’s the deepest and widest split tail we’ve released. The board prominently features a snowboard-esque, double side cut outline. Strongly influenced by years of snowboarding, and then seeing the boards of underground SD shapers like Mirandon and Caster, we first developed and released our double side cut on the “Pelagic” model, in the late 2000’s. Like with a snowboard, the sidecut “grips” the riding surface and allows for more radical, tighter radius direction changes on wider, otherwise difficult to turn sharply, outlines and flat rockers. The sidecut hooks into the wave face and turns surprisingly sharp, without the usual drift or skip or slip, associated with common wide tail fish shapes. Staying with the fishy retro vibe, the #RNF_Retro features a very flat deck with a defined, steeply angled rail, but tucked under soft into the bottom. The flat deck allows the board to be ridden thinner, which enables more flex. Thin flat decks maintain more scoop in the deck rocker, which when surfed with the rail buried perpendicular into the surface, helps low rocker boards turn in tighter arcs, rather than tracking or flattening out. All these elements are built around our time tested and proven RNF rocker bottom curves. The RNF Retro is flat up front with the slightest of single concave through the center, and a spiral vee from the fins back. This equates to a fast, yet precise and comfortable, familiar ride, without sacrificing glide. Keels are fast and fun, but split keels perform better. The RNF Retro is designed to be ridden with split keels, or a Twin + two (small trailers) quad setup. There’s no rear fin box on this thing. We created a special, subdued, era reminiscent, model specific logo just for this board. The RNF-Retro is built standard with #SonOfCobra designed tints and opaque #Resinworks, for that proper look and feel. The #RNF_Retro is Groovy Smooth Glide Vibe - meets proven Mayhem #Pro_formance. Like a beautiful vintage hotrod, souped up with a modern brand new Engine and transmission, it’s the best of both worlds. Now you can have your cool and rip it too.