FoilMount Standard

The FoilMount is a universal hydrofoil mounting system, this means that you can put a hydrofoil track on just about any board you already have. The FoilMount is a universal hydrofoil mounting system, this means that you can put a hydrofoil track on just about any board you already have. The FoilMount uses a specially designed 3M adhesive tape to stick to the bottom of your board. It will accommodate any foil that uses the 90mm track system (this is industry standard). It is a easy way to fix a broken track system. It is also great for retrofitting boards with through bolt holes to give them the adjust-ability of a sliding track system. The FoilMount can be removed but cannot be reused. It is very easy to install, just prep the surface with alcohol, peel the tape backing, and stick! Standard FoilMount The standard mount is a flat plate that can be installed on any flat board surface. It is suitable for most SUP boards, hydrofoil boards, Skim boards, Surfboards. If you surface has some curve to it try the Ridge Mount system. If you're trying to outfit a board with a tuttle box system or a windsurfing rig try the Hole Mount system. If you have mounting questions you can reach us by emailing sales@foilmount.com The 2.0 Standard now includes: -Upgraded FoilMount plate with one piece adhesive backing -4 high strength brass slider nuts -1 set of 4 flat head M8x16mm bolts for Slingshot and most other foils -1 set of 4 flat head M6x12mm bolts for Takuma Surf hydrofoils -1 set of 4 pan head M8x20mm bolts for Moses and older Liquid Force foils (instructions, alcohol pads, scotch-brite pad, FoilMount box)