The Bottom Feeder is a breakthrough design specifically focused on small wave performance.
Matt “Mayhem” Biolos of …Lost Surfboards has a keen eye (and hand) for small wave “Average Joe” performance. His string of small wave dominators includes the Round Nose Fish, Blunt, Motivator, Plank and Uber Plank. The Bottom Feeder is his latest machine for small wave shredding while other surfers are punching the water or complaining about the wrong tide. The Bottom Feeder not only makes small wave surfing a blast for the less skilled of us in the water, it also excels as a small wave ripper for advanced surfers too.
Bottom Feeder Tech Specs
• Wide/Flat Nose Entry
• Flat to Vee Bottom Shape
• Powerful Tailblock for Generating Speed in Mush
• Quad Fin standard with Futures Boxes for Controller Fins
What We Like:
If you live in an area plagued with soft or small conditions, the Bottom Feeder is definitely a board to check out. In fact, after you get the board wired, you won’t even think of it as a plague anymore. The Bottom Feeder picked up where the …Lost Plank and Uber Plank started and now brings even more wave catching and performance to the table.
Compared to the Plank and Uber Plank, the Bottom Feeder has a slightly flatter entry rocker for better paddling and wave catching ability. The Bottom Feeder is also snappier in turns with a much more high performance feel, all while being just as easy and fun to surf. The Bottom Feeder makes small wave shortboard surfing incredibly fun. So fun that you’re smiling ear to ear when it’s only thigh high and others are bogging, complaining or not even suiting up at all. You can actually power surf waves that you wouldn’t even think of surfing before. The big wide tail loves to be pushed – HARD! You kind of wonder why everyone doesn’t have a board like this….
There seems to be two schools of thought on sizing these boards. The “Bros and Average Joes” are going bigger. These boards have flat bottoms with vee in the tail. This design can handle higher volumes and widths with ease – unlike concave boards. How big do you go? The bigger you go, the more waves you will catch and the smaller waves you can shred. Obviously you can go too big, but in general there is a tendency for all of us to ask ourselves “how small can I ride this thing?”, while all the while reducing your fun factor. In general 10-20% more float than your shortboard is a good starting point.
The Pros are taking these boards and sizing them small, like 5’0 and doing crazy disc-o moves, noserides and hard carves in average surf. The video of Mason Ho shredding his mini-Feeder is proof that this an all-ability Weapon of Mush Destruction. The smaller you go, the more maneuverable the board gets, but also the less waves you will catch and the more dependent the board will become on the surfer’s ability to perform in small waves. When in doubt….go bigger.
When you’re watching the Mason video, you’ll also see that’s he’s surfing the Bottom Feeder in waves you wouldn’t consider grovelers. This board has range outside its target -both for pros and bros. It’s an easy board to surf and that confidence carries up to head high as long as it’s not inside out and barreling. But where this board really lights a fire and separates itself from the pack is chest high down to barely breaking. You’ll have some of your best sessions when your friends shrug it off and don’t even paddle out.
What we don’t like:
The flatter nose rocker takes a few sessions to get used to, especially on late drops. Once you adjust, you come to really like it for paddle power and wave count. This board likes to be surfed a little further back than the Plank or Uber Plank, which is also why the board is snappier in the turns. We’ve tried it with other fins, but always come back to the Futures Controllers as the only ones that not only work, but work really good. Big tails need big fins and the Controllers pair up with the big tailblock to provide mega horsepower.
Why you want the Bottom Feeder:
The Bottom Feeder will stoke you out and make almost every day a good day. If you live on the East Coast or similar and don’t have a board like this in your quiver, you're missing out on the fun.


20 Response(s) to ...Lost Bottom Feeder
tur yates says:
Trip forman, did you used to rep North Sails on the east coast back in the 90's?
Posted on November 3, 2012 at 2:39 am
chris says:
Yes, that is the same Trip Forman. lol
Posted on November 6, 2012 at 9:15 am
Eric says:
Wonder if you have any thoughts on using these boards on ultra light wind (8-10kts) instead of "door-like" twin tips or full-on course/race boards?
Sounds like these could be more fun to jibe and even pop since they probably give you enough bouyancy to keep you gliding as long as the kite is flying... Did you guys ever test these on "no wind" days on flat water?
Posted on November 7, 2012 at 12:54 pm
Matt Kiczyinski says:
Hey Matt Nuzzo!!! Greetings from Aquidneck Island!!!
Posted on November 7, 2012 at 7:53 pm
Matt Nuzzo says:
Good question Eric. We actually have had quite a few people getting the Bottom Feeder for kiting light winds. It works great for a bunch of reasons. Since it is flat and wide you have a really nice platform for early planing. The double concave off the tail makes this board turn a lot faster and harder than any board this size that I have kited before. It rolls rail to rail really easily from this shape.
You should definitely check one out. They have a ton of float and rip in the light stuff. In my opinion, kiting the Bottom Feeder is far more fun that kiting a 160cm flat light wind twin tip.
Email or call with more questions,
Matt Nuzzo
Posted on November 7, 2012 at 2:29 pm
Trip says:
HCH,
Thanks for your question. The volume on the 6'0 Bottom Feeders has been ranging between 43-44 liters.We don't have any 6'0's in stock but do have 5'10, 5'8 and 5'6 in stock. The 5'10 volume is 38.5 liters. This is the size I ride at 6'2 x 210 lbs. The BF is a very easy board to ride short due to the flatter rocker and wider width.
If you are interested in more volume than the 5'10 Bottom Feeder, we have the following ...Lost boards arriving soon:
6'0 ...Lost Couch Potato @ 43.1 liters(with "Lucky Bastards" unique resin work)
6'0 ...Lost Bottom Feeder (Cork, Carbon Composite Construction)
We also have the Roberts Mush Machine in stock in both 6'0 and 6'2 with Hydroflex Natural Construction.These two boards are lower in volume (per size) than the Bottom Feeders so you typically have to upsize 2" (I ride a 5'10 Bottom Feeder and a 6"0 Mush Machine)
Hope this info helps. I'm at the shop today until 6pm ET. Glad to help out with any questions or orders.
Thanks - Trip
Posted on February 5, 2013 at 12:07 pm
mark bates says:
Why in the world would you spend the time and money to produce a video and NOT turn off the shop's music? I'm just sayin'.
Posted on December 10, 2012 at 6:27 pm
Trip says:
Vern
The short answer to your question is YES!
It is important to not only look at length, but also board design and volume.
With the Bottom Feeder, the board design is very high volume for its length and also has a very flat entry (nose) rocker. This makes paddling a Bottom Feeder significantly easier than any other shortboard you have tried in the past.
Due to the width in the nose, center and tail, it is also very stable for paddling and takeoffs.
All of this leads us back to the question as hand : Can it get you off your longboard?
1. YES: It works in every day average waves. You can also push hard in your turns like your longboard. You don't have to hop it or nurse it through flat sections either.
2. YES : It is easy to paddle and catch waves
3. YES : You can actually use it rather than dreaming about using it (like most longboarder's shortboards)
As far as what size is for you, we would need to know your height, weight, age, fitness, ability and where you are surfing. This is best to handle over the phone in case we or you have more questions. 252-987-6000.
Thanks Vern,
Trip
Posted on December 17, 2012 at 2:17 pm
Trip says:
Chuck
Good eye! Yes you're right, I checked out Mason's board and it is a thruster, but it is also a 5'0 with a much smaller tail than sizes that are typically ordered (5'8 up to 6'2).
One of the best things about the Bottom Feeder is how hard you can push on the tail in junk surf and how hard the board accelerates, when other boards would just mush out and bog. Big Wide tails need big fins, and really wide tails also benefit from Quads. That's why Futures Controller Quads are the way to go on this board.
What I've noticed on the really big and really small bottom feeders is that they grow (or shrink) exponentially in size. Mason's 5'0 is a pretty small board with a much narrower tail than what you would see on a 5'10. That's why he can use a thruster set up. Put the same set up in a 5'10 and you would be very disappointed.
Hope all this info helps. I'm always at the shop if you want to discuss over the phone. 252-987-6000
Thanks Chuck,
Trip
Posted on December 17, 2012 at 2:15 pm
chuck says:
...and why would you feature a video with a thruster set up after hyping the quad/ w futures boxes as the std set up and way to go...I'm just saying...surfer dudes...
Posted on December 15, 2012 at 5:33 pm
vernlewis says:
So if you are an old guy (longboarder) is 6'4" the largest available? Can this bring us senior citizens back to short boarding?
Posted on December 16, 2012 at 8:23 am
Mike says:
@Mark
You must have some ear man, I can't hear any sort of background music, nothing that's annoying or all that noticeable.
Posted on December 17, 2012 at 10:01 am
Vern Lewis says:
Thanks Trip-Surfing mush in Texas. 6'0" 188ibs, 67 years old, & surfed contests into the 90's. Currently riding 9'0" Walden Magic Model 2 3/4" thick. Tri set-up. Your suggestion on BF size, width, & thickness. V
Posted on December 18, 2012 at 10:09 am
chris says:
ALEX808
Thanks for your question.
With regards to sizing your Bottom Feeder, since you are already riding a 5'6 Dumpster Diver, that would be the max length we would recommend in a BF. With a stock 5'6 Bottom Feeder, you would have really good grovel performance and still be able to whip some surprisingly good turns in the pocket.
The other option would be to drop down to 5'4 Bottom Feeder (since your DD is a 5'6). This would give you more maneuverability, but less grovel and wave count.
Whether you go 5'4 or 5'6 depends on where you live, the surf conditions, the wave count you're looking for and how far out you're looking to spread your quiver. I think 5'6 would give you the highest wave count, mega grovel, and still be plenty turny when you needed it to be. 5'6 would be my pick for sure.
The shop is OPEN 9-6 7 days a week if you have any questions or want to get an order going from our stock or custom.
Posted on February 25, 2013 at 9:39 am
hch says:
whats the volume on the 6'0"
Posted on February 2, 2013 at 11:20 pm
ALEX808 says:
What would be my size? I'm 5'8, 170 lbs, 35 years old. riding a 5'6 dumpster diver, 5'11 fred rubble
Posted on February 16, 2013 at 3:49 pm
Trip says:
Rickard
Thanks for your question. I've got a friend up in New York that we set up with a very similar quiver to yours. He's your size, with roughly the same surf and his quiver is 5'4 Bottom Feeder, 5'10 Sub Driver, 5'9 Mini Driver. With that being said, 5'4 is the call on your Bottom Feeder. We have a stock 5'4 coming in our next shipment from Lost or we can always help you place a custom order if you wanted anything tweaked with dimensions or color.
If you have any questions or would like to place an order you can always reach me at the shop or by skype at real.trip.
Thanks Rickard.
Posted on April 23, 2013 at 12:16 pm
Ricko Lundgren says:
Hey! I was browsing around looking for a board for surfing home, here in Sweden. We don't get any groundswell, it's all sloppy windwaves and total gutless mush. Thinking this board would be a bagful of fun for exactly this. What size would you recommend? I am fit, 23, 5'9, 165 lbs and I normally surf a 5'6 Rocket at 25,3L and/or 5'10 Sub Driver. I was thinking a 5'4 BF. What do you reckon?
Thanks,
Ricko
Posted on April 19, 2013 at 4:18 am
Greg Laing says:
I'm very interested in the bottom feeder, what size should I get, I'm a 21 year old intermediate surfer, I'm 6'4 180 lbs. I surf new jersey waves and need a small wave board for the summer
Posted on April 26, 2013 at 10:30 am
Trip says:
Greg
Thx for your question. There's always a range you can size this board based on how small of waves you want it to work in (grovel super power) and also how the rest of your quiver is sized.
At your weight the 5'8 works really well for a variety of conditions and will fit nicely into little NJ summer beach breaks. At your height you can also go as long as 5'10 or 5'11 and have a board that would glide really easy in almost nothing.
We have a 5'8 and 5'11 Lucky Bastards resin work Bottom Feeder in stock. Both KILLER boards. We can also go custom for you in any size or construction.
Hit us up at the shop for more info or to place an order. Glad to help. Thx
Posted on April 26, 2013 at 2:09 pm